< Bar feeders for multi-spindle lathes
Next 25
The Next 25 Serie II is an automatic bar feeder for multi-spindle lathes, completely integrated, able to handle bars with diameters between 4 and 25 mm and lengths between 2,850 and 4,200 mm. It is very compact and high-performing, suitable for making the most of the lathe, ensuring ease of use as well as the speeds of rotation (more than 10,000 rotations/minute), bar changes (as little as 3 seconds), and indexing. It is also silent, and all of these things translate into a considerable increase of productivity.
Round bars
4 – 25 mm
Hexagonal bars
4 – 21 mm
Square bars
4 – 17 mm
Bar length
2.850 – 4.200 mm
Fixed headstock
Yes
Mobile headstock
No
MP magazine available
Yes, 270 mm
UP magazine available
No
P magazine available
Yes, 1.800 mm
F magazine available
No
Remnant length
No backward movement
Bar changeover time
22 sec. (for bar length of 3000 mm)
Bar weight
From 75 g to 18 kg
Bar feeder weight
Ver.32 900 kg; Ver.38 1100 kg; Ver.42 1200 kg
Number of spindles
6 – 8
Reversible magazines
Yes
Feed rate
320 mm/sec
Return speed
320 mm/sec
Compressed air
6 bar
Installed power
2 kW
Operating voltage
230/400 volt